KNEKT Dome Port for DJI Osmo Action

Capture amazing images above and below the surface with the OAN Dome Port for the DJI OSMO Action.

With the KSD6 Dome Port we created an entirely new product category for the GoPro. Now we are taking it to the next level with the OAN Dome Port for DJI OSMO Action. This semi-hemispherical 6” dome port is one of the most advanced OSMO Action accessories available. By moving the waterline away from the lens we dramatically improve underwater functionality and image quality. The field of view is over 30% wider and images are cleaner. During production we pressure test the Dome Port to a depth of 135ft. If you use a OSMO ACTION underwater without the OAN Dome Port you are missing out on all that your camera has to offer. If you are in professional production this is a mandatory addition to your set of tools.

USD $ 122

In stock

Add to wishlist
SKU: OAND6 Category:

In addition to improved underwater use the OAND6 Dome Port makes it possible to capture images both above and below the water simultaneously. These are often referred to as half and half, 50/50, over under or split-level pictures. Until now one would need to invest thousands of dollars in high-end camera equipment in order to create these images. Even with the best gear producing quality over under results would be a challenge due to the complexity of focus, exposure and depth of field management. The OAN Dome Port paired with the OSMO ACTION overcomes all of this. The simplicity of operation, nearly infinite depth of field, wide-angle lens and video/still image quality make the OSMO Action perfectly suited for this application. Just slide the Dome Port onto the OSMO ACTION and produce stunning imagery above, below and in-between.

The OAN Dome Port utilizes a semi-hemispherical acrylic dome that we have custom made just for KNEKT. This dome has been optically matched to work with the OSMO Action  lens. The use of a semi-hemispherical dome eliminates the perpendicular angle between the backing plate and the dome. The benefits of this are the elimination of circular reflection and improved water sheeting while reducing the form factor and maintaining full front face surface area. By utilizing an interlocking two-piece design the dome is captured mechanically to create an O-ring compression seal, no glue or silicone is used anywhere. This design allows the dome to be fully disassembled for cleaning and service. If the acrylic is scratched or cracked it can be replaced. The OAN works with the DJI OSMO ACTION and does not require any special modifications or separate accessories. The OAND6 provides access to all of the camera’s buttons and touch screen while installed. There is also a custom machined waterline indicator on the backing plate to assist in getting the perfect over under shot.

The OAND6 can be used as a stand-alone product, it does not require the use of a handle or trigger to function. The OAND6 is compatible with the KNEKT FPSH Pole, KDT Dive Trigger, and Hand Trigger OANPT.

Product Highlights
Depth Tested to 135ft
30% Wider Image Capture Underwater
50% Minimal Focal Length Improvement
Semi-Hemispherical Design
Optically Correct Acrylic Dome
Access to all buttons
H2O Waterline Indicator on Backing Plate
View rear LCD Screen
Two Piece Mechanical Port Capture
Triple O-Ring Construction, No Glue or Silicone Used
Compatible with DJI OSMO Action
Compatible with OANPGT Pistol Grip Trigger

Materials – Military Grade Aluminum, Stainless Steel and Acrylic
Mounting – Custom GoPro to KSD6SS O-Ring Interface
Dimensions – 15x15x10cm
Weight – 0.3kg

In the Box
OAND6 Dome Port
View Window Backer Bar
¼-20 Screw (2)
Neoprene Dome Port Cover

Box dimensions – 20x18x18cm
Box Weight – 0.5kg